Shot Blasting Booth
  • Shot Blasting Booth - 0 Shot Blasting Booth - 0

Shot Blasting Booth

shot blasting booth/room is primarily for cleaning big steel structural parts, vessel, truck chassis to remove the rusty spot, rusty layer and scale cinder on steel to obtain a uniform, smooth and glossy metal surface allowing improved coating quality and higher anti-corrosion performance, the surface stress of steel is strengthened, and the service life of workpieces is prolonged.

Send Inquiry

Product Description

1.Introduction of Shot Blasting Booth

shot blasting booth/room is primarily for cleaning big steel structural parts, vessel, truck chassis to remove the rusty spot, rusty layer and scale cinder on steel to obtain a uniform, smooth and glossy metal surface allowing improved coating quality and higher anti-corrosion performance, the surface stress of steel is strengthened, and the service life of workpieces is prolonged.The dry type sand blasting booth has sand blasting pot, dust collector, trolley and abrasive circulation system.
Room Size:
The right room size is dependent on the size of the largest workpiece you are trying to blast. The sand blasting room should be large enough to accommodate the largest workpiece and provide ample room for the blasting personnel to work. We recommend 1-1.5m of workspace around the blasting being blaster.
We can customized the sand blasting booth according to the buyer's workpiece max length, width, height and weight.
Advantage of Shot blasting booth:
1. Flatcar type sand blast cleaning system
2. New type scraper conveyor structure
3. continuous sand blasting system with spraying guns
4. Dust collector in multiple positions
5. Two safety door both front and back positions


2.Specification of Shot Blasting Booth:

Max. Workpiece size (L*W*H) 12*5*3.5 m
Max. Workpiece weight Max. 5 T
Finish level Can achieve Sa2-2 .5 (GB8923-88)
Processing speed 30 m3/min per blasting guns
Surface roughness 40~75 μ (Depend on abrasive size)
Suggest abrasive Grinding steel shot, Φ0.5~1.5
Sand blasting room inside dimension (L*W*H) 15*8*6 m
Electric power supply 380V, 3P, 50HZ or customized
Pit requirement Waterproof

We can design and manufacture all kinds of non-standard Shot Blasting Booth according to customer different workpiece detail requirement,weight and productivity.


3.Details of Shot Blasting Booth:

These pictures will better help you understand



4. Certification of Shot Blasting Booth:

Qingdao Puhua Heavy Industrial Group was established in 2006, total registered capital over 8,500,000 dollar, total area nearly 50,000 square meters.
Our company have passed CE, ISO certificates. As a result of our high-quality Shot Blasting Booth:, customer service and competitive price, we have gained a global sales network reaching more than 90 countries on five continents.


5.FAQ

1. What is the delivery time?
20-40 working day, based on factory’s production order conditions.
2. How to installation Shot Blasting Booth:?
We supply overseas service, engineer can go to your place guide installation and debugging.
3. What size machine suit for us?
We design machine following your request, usually based on your workpiece size, weight and efficiency.
4. How to control the quality of Shot Blasting Booth:?
One year warranty,and 10 teams QC to check every part from drawing to machine finished.
5. What work part can clean by Shot Blasting Booth:?
castings,forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wallparts which is not suitable for impact.
6. What type abrasive used?
0.8-1.2 mm size wire cast steel shot
7. How it control for whole work?
PLC control, setup safety interlock device between system
◆If the examining door is open, the impeller heads won’t start.
◆If the cover of impeller head is open, the impeller head won’t start.
◆If the impeller heads doesn’t work, the shots valves won’t work.
◆If the separator won’t work, the elevator won’t work.
◆If the elevator won’t work, the screw conveyor won’t work.
◆If the screw conveyor won’t work, the shots valve won’t work.
◆Error warning system on abrasive circle system, any error come, all the above work will stop automatic.
8. What is the clean speed:
Can be customized, usually 0.5-2.5 m/min
9. What clean grade?
Sa2.5 metal luster


6. Our service:

1.Machine guarantee one year except damage by human wrong operation caused.
2.Provide installation drawings, pit design drawings, operation manuals, electrical manuals, maintenance manuals, electrical wiring diagrams, certificates and packing lists.
3.We can go to your factory to guiding installation and train your stuff.

If you are interested in Shot Blasting Booth:, you are welcome to contact us.





Hot Tags: Shot Blasting Booth, Buy, Customized, Bulk, China, Cheap, Discount, Low Price, Buy Discount, Fashion, Newest, Quality, Advanced, Durable, Easy-Maintainable, Latest Selling, Manufacturers, Suppliers, Factory, In Stock, Free Sample, Brands, Made In China, Price, Price List, Quotation, CE, One Year Warranty

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.
  • QR