Painting Room Painting/Spray booth provides a closed environment for vehicles painting with pressure controlling.
As we know that dust free, appropriate temperature and wind speed are necessary for painting.
Then this spray booth can provide a relatively ideal painting environment; this can be controlled by several groups of ventilation, heating system and filtering system etc. Heated air produced by the burner can help the spray booth to hold a suitable temperature, air flow and illumination.
We can provide rock wool wallboard, EPS wallboard, electric heating, diesel heating, natural gas heating, all kinds of filtration systems. We can also design a suitable spary booth for you according to your actual site.
|Max. Workpiece size (L*W*H)||12*5*3.5 m|
|Max. Workpiece weight||Max. 5 T|
|Finish level||Can achieve Sa2-2 .5 (GB8923-88)|
|Processing speed||30 m3/min per blasting guns|
|Surface roughness||40~75 μ (Depend on abrasive size)|
|Suggest abrasive||Grinding steel shot, Φ0.5~1.5|
|Sand blasting room inside dimension (L*W*H)||15*8*6 m|
|Electric power supply||380V, 3P, 50HZ or customized|
We can design and manufacture all kinds of non-standard Painting Room according to customer different workpiece detail requirement,weight and productivity.
These pictures will better help you understand
Qingdao Puhua Heavy Industrial Group was established in 2006, total registered capital over 8,500,000 dollar, total area nearly 50,000 square meters.
Our company have passed CE, ISO certificates. As a result of our high-quality Painting Room:, customer service and competitive price, we have gained a global sales network reaching more than 90 countries on five continents.
1. What is the delivery time?
20-40 working day, based on factory’s production order conditions.
2. How to installation Painting Room:?
We supply overseas service, engineer can go to your place guide installation and debugging.
3. What size machine suit for us?
We design machine following your request, usually based on your workpiece size, weight and efficiency.
4. How to control the quality of Painting Room:?
One year warranty,and 10 teams QC to check every part from drawing to machine finished.
5. What work part can clean by Painting Room:?
castings,forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wallparts which is not suitable for impact.
6. What type abrasive used?
0.8-1.2 mm size wire cast steel shot
7. How it control for whole work?
PLC control, setup safety interlock device between system
◆If the examining door is open, the impeller heads won’t start.
◆If the cover of impeller head is open, the impeller head won’t start.
◆If the impeller heads doesn’t work, the shots valves won’t work.
◆If the separator won’t work, the elevator won’t work.
◆If the elevator won’t work, the screw conveyor won’t work.
◆If the screw conveyor won’t work, the shots valve won’t work.
◆Error warning system on abrasive circle system, any error come, all the above work will stop automatic.
8. What is the clean speed:
Can be customized, usually 0.5-2.5 m/min
9. What clean grade?
Sa2.5 metal luster
1.Machine guarantee one year except damage by human wrong operation caused.
2.Provide installation drawings, pit design drawings, operation manuals, electrical manuals, maintenance manuals, electrical wiring diagrams, certificates and packing lists.
3.We can go to your factory to guiding installation and train your stuff.
If you are interested in Painting Room:, you are welcome to contact us.