Road Shot Blasting Machine

The road shot blasting machine uses mechanical centrifugal force to project steel shots or steel grit onto the working surface at high speed and at a specific angle. The abrasive impacts the road surface, removing laitance, oil stains, old coatings, and traffic marking residue. After cleaning, the road surface appears clean with a uniform rough texture, maintaining an appropriate profile depth without significant unevenness. At the same time, the negative pressure generated by the dust collection system recovers the abrasive along with debris and dust. After separation, intact abrasive is automatically recycled for reuse, while impurities and dust fall into the collection bin for disposal. The entire process achieves dust-free and pollution-free construction.

Main Features

Dust-Free and Environmentally Friendly Construction

The equipment integrates a high-efficiency dust collection system that captures dust during operation, preventing it from dispersing into the environment and meeting environmental construction requirements.

Uniform Surface Treatment

By adjusting the blasting speed and travel speed, consistent surface roughness can be achieved on different base materials, avoiding excessive damage while eliminating untreated areas.

Wide Applicability to Base Materials

Capable of treating various base materials including concrete, asphalt, and steel plates, suitable for different working conditions.

High Construction Efficiency

Mechanized continuous operation achieves a much higher processing area per hour compared to manual grinding or chemical cleaning methods.

No Drying Time Required

Dry operation means the treated surface is ready for the next process immediately without waiting for drying.

Easy Equipment Operation

Can be operated by a single person with adjustable travel speed to suit different work surface requirements.Typical Applications

Road Marking Removal

Removal of old traffic markings on highways, urban roads, and airport runways without damaging the underlying road surface.

Concrete Surface Texturing

Surface texturing of bridge decks and tunnel cement pavements to increase adhesion for overlay layers.

Asphalt Pavement Maintenance

Treatment of bleeding asphalt pavements and restoration of skid resistance to improve driving safety.

Steel Bridge Deck Rust Removal

Rust removal and surface profiling of steel bridge decks to provide a good foundation for anti-corrosion coatings.

Airport Runway Maintenance

Removal of rubber residue from runways and restoration of friction coefficient.

Industrial Floor Treatment

Removal of old coatings and surface texturing of factory floors and warehouse floors.

Construction field of road shot blasting machine:

1. Industrial anti-corrosion and waterproof construction field:

2. In the field of road maintenance and maintenance:

Coating pretreatment of industrial floor; Anti-skid treatment and oil flooding treatment of road surface;

Coating pretreatment of steel surface; road finish treatment;

Waterproof surface treatment of concrete bridges; Anti-slip cleaning treatment of tunnels;

Steel box bridge surface anti-corrosion pretreatment; marking line cleaning;

Qingdao Puhua Heavy Industrial Group is a professional road Shot Blasting Machine manufactures and Suppliers from China road Shot Blasting Machine Factory.There may be a lot of road Shot Blasting Machine manufacturers out there, but not all road Shot Blasting Machine manufacturers are alike. Our professional expertise in manufacturing road Shot Blasting Machine has been honed over the past 15+ years.