Recovery Sand Blasting Booth is widely used in shipbuilding industry, military, and engineering machinery, petrochemical machinery. It could be designed according to customer’s requirements.
Our Sand Blasting Chamber/ Shot Blasting Room :
Sand Blasting Chamber/ Shot Blasting Chamber includes two parts, part one is the blasting system , the other is the sand material recycling ( including the floor back to the sand , the segmented recycling ) , separation and dedusting system ( including partial and full room dust removal ) . A flatcar is commonly used as a work piece carrier .
Sand Blasting Chamber is special designed to dedicate surface treatment requirements for large structural parts, cars, dump trucks and others.
Shot blasting is powered with compressed air, the abrasive media is accelerated to 50-60 m/s impact to the workpieces’ surface, it is a non-contact, less non-polluting method of surface treatment.
The advantages are a flexible layout, easy maintenance, less one-time investment etc., and thus very popular among structural parts producers.
Key Features of Sand Blasting Chamber/ Shot Blasting Booth :
Sand Blasting Chamber/ Shot Blasting Chamber is widely used in shipbuilding industry, military, and engineering machinery, petrochemical machinery, hydraulic machinery and bridge structures, locomotives and etc. and is suitable for large metal structure before painting surface blast cleaned and shot peening treatment .
sandblasting processing can thoroughly clean the surface of work piece of welding slag, rust, descaling, grease, improve surface coating adhesion, achieve long-term anti-corrosion purpose. In addition, using shot peening treatment, which can eliminate the work piece surface stress and improve the intensity.
|Max. Workpiece size (L*W*H)||12*5*3.5 m|
|Max. Workpiece weight||Max. 5 T|
|Finish level||Can achieve Sa2-2 .5 (GB8923-88)|
|Processing speed||30 m3/min per blasting guns|
|Surface roughness||40~75 μ (Depend on abrasive size)|
|Suggest abrasive||Grinding steel shot, Φ0.5~1.5|
Sand blasting room inside
|Electric power supply||380V, 3P, 50HZ or customized|
We can design and manufacture all kinds of non-standard Recovery Sand Blasting Booth according to customer different workpiece detail requirement,weight and productivity.
These pictures will better help you understand Recovery Sand Blasting Booth.
Qingdao Puhua Heavy Industrial Group was established in 2006, total registered capital over 8,500,000 dollar, total area nearly 50,000 square meters.
Our company have passed CE, ISO certificates. As a result of our high-quality Recovery Sand Blasting Booth, customer service and competitive price, we have gained a global sales network reaching more than 90 countries on five continents.
1. What is the delivery time?
20-40 working day, based on factory’s production order conditions.
2. How to installation Recovery Sand Blasting Booth:?
We supply overseas service, engineer can go to your place guide installation and debugging.
3. What size machine suit for us?
We design machine following your request, usually based on your workpiece size, weight and efficiency.
4. How to control the quality of Recovery Sand Blasting Booth:?
One year warranty,and 10 teams QC to check every part from drawing to machine finished.
5. What work part can clean by Recovery Sand Blasting Booth:?
castings,forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wallparts which is not suitable for impact.
6. What type abrasive used?
0.8-1.2 mm size wire cast steel shot
7. How it control for whole work?
PLC control, setup safety interlock device between system
◆If the examining door is open, the impeller heads won’t start.
◆If the cover of impeller head is open, the impeller head won’t start.
◆If the impeller heads doesn’t work, the shots valves won’t work.
◆If the separator won’t work, the elevator won’t work.
◆If the elevator won’t work, the screw conveyor won’t work.
◆If the screw conveyor won’t work, the shots valve won’t work.
◆Error warning system on abrasive circle system, any error come, all the above work will stop automatic.
8. What is the clean speed:
Can be customized, usually 0.5-2.5 m/min
9. What clean grade?
Sa2.5 metal luster
1.Machine guarantee one year except damage by human wrong operation caused.
2.Provide installation drawings, pit design drawings, operation manuals, electrical manuals, maintenance manuals, electrical wiring diagrams, certificates and packing lists.
3.We can go to your factory to guiding installation and train your stuff.
If you are interested in Recovery Sand Blasting Booth:, you are welcome to contact us.