Through Type Shot Blasting Machine
  • Through Type Shot Blasting Machine - 0 Through Type Shot Blasting Machine - 0
  • Through Type Shot Blasting Machine - 1 Through Type Shot Blasting Machine - 1
  • Through Type Shot Blasting Machine - 2 Through Type Shot Blasting Machine - 2

Through Type Shot Blasting Machine

The roller through type shot blasting machine cleans plates, beams, structures removing scale, dirt and rust. The chamber with protection has a closed metal construction covered inside with rubber sheets to absorb cinematic shot energy. The pipes are directed in translation and rotation motions, one after another, by a transport device into the shot blasting chamber where they are cleaned.

Send Inquiry

Product Description

1.Introduction of Through Type Shot Blasting Machine

The roller through type shot blasting machine cleans plates, beams, structures removing scale, dirt and rust. The chamber with protection has a closed metal construction covered inside with rubber sheets to absorb cinematic shot energy. The pipes are directed in translation and rotation motions, one after another, by a transport device into the shot blasting chamber where they are cleaned.
Shotblasters build-up a high-velocity directional metal shot stream. The shotblaster construction allows to form and regulate the directional stream. The regeneration of used shots takes place continuously in closed cycles charging shots by a screw conveyor an elevator into the separator, shot eliminator and then into the hopper.


2.Specification of Through Type Shot Blasting Machine:

Type Q69(customizable)
The effective cleaning width(mm) 800-4000
The room feed-in size(mm) 1000*400---4200*400
The length of cleaning workpiece(mm) 1200-12000
The speed of wheel conveyer(m/min) 0.5-4
The thicksness of cleaning steelsheet(mm) 3-100---4.4-100
The section steel specification(mm) 800*300---4000*300
The quantity of shot blasting(kg/min) 4*180---8*360
The first enclosed quantity(kg) 4000---11000
Roll brush adjusting height(mm) 200---900
Airness capacity(m³/h) 22000---38000
Exterior size(mm) 25014*4500*9015
Total power(except for dust cleaning)(kw) 90---293.6

We can design and manufacture all kinds of non-standard Through Type Shot Blasting Machine according to customer different workpiece detail requirement,weight and productivity.


3.Details of Through Type Shot Blasting Machine:

These pictures will better help you understand




4. Certification of Through Type Shot Blasting Machine:

Qingdao Puhua Heavy Industrial Group was established in 2006, total registered capital over 8,500,000 dollar, total area nearly 50,000 square meters.
Our company have passed CE, ISO certificates. As a result of our high-quality Through Type Shot Blasting Machine:, customer service and competitive price, we have gained a global sales network reaching more than 90 countries on five continents.


5.FAQ

1. What is the delivery time?
20-40 working day, based on factory’s production order conditions.
2. How to installation Through Type Shot Blasting Machine:?
We supply overseas service, engineer can go to your place guide installation and debugging.
3. What size machine suit for us?
We design machine following your request, usually based on your workpiece size, weight and efficiency.
4. How to control the quality of Through Type Shot Blasting Machine:?
One year warranty,and 10 teams QC to check every part from drawing to machine finished.
5. What work part can clean by Through Type Shot Blasting Machine:?
castings,forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wallparts which is not suitable for impact.
6. What type abrasive used?
0.8-1.2 mm size wire cast steel shot
7. How it control for whole work?
PLC control, setup safety interlock device between system
◆If the examining door is open, the impeller heads won’t start.
◆If the cover of impeller head is open, the impeller head won’t start.
◆If the impeller heads doesn’t work, the shots valves won’t work.
◆If the separator won’t work, the elevator won’t work.
◆If the elevator won’t work, the screw conveyor won’t work.
◆If the screw conveyor won’t work, the shots valve won’t work.
◆Error warning system on abrasive circle system, any error come, all the above work will stop automatic.
8. What is the clean speed:
Can be customized, usually 0.5-2.5 m/min
9. What clean grade?
Sa2.5 metal luster


6. Our service:

1.Machine guarantee one year except damage by human wrong operation caused.
2.Provide installation drawings, pit design drawings, operation manuals, electrical manuals, maintenance manuals, electrical wiring diagrams, certificates and packing lists.
3.We can go to your factory to guiding installation and train your stuff.

If you are interested in Through Type Shot Blasting Machine:, you are welcome to contact us.





Hot Tags: Through Type Shot Blasting Machine, Buy, Customized, Bulk, China, Cheap, Discount, Low Price, Buy Discount, Fashion, Newest, Quality, Advanced, Durable, Easy-Maintainable, Latest Selling, Manufacturers, Suppliers, Factory, In Stock, Free Sample, Brands, Made In China, Price, Price List, Quotation, CE, One Year Warranty

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.
  • QR