Features of steel pipe inner wall shot blasting machine


Features of steel pipe inner wall shot blasting machine:

1. Simple operation and high output power.

2. Compact structure, sophisticated use, and small footprint.

3. The spray gun movement method is selected, and the spray gun is positioned accurately and in a good position.

4. The workpiece is tilted and poured, which saves height, has good rigidity, and the projectile is easy to flow out.

5. Working method: steel pipes with a diameter of more than 100mm use workpiece rotating shot peening; steel pipes with a diameter of less than 100mm should be replaced with special spray guns, and workpieces should be finished without rotating shot peening.

Advantages and disadvantages of steel pipe inner wall shot blasting machine:

1. The shot blasting device adopts upward shot blasting arrangement. Because the pipe diameter is different, the bottom surface of the steel pipe is roughly at the same height when it is transported on the roller table. The shot blaster is projected from bottom to top. The distance between the projectile and the surface of the steel pipe is basically the same. Steel pipes of different diameters have the same finishing effect on the outside. Provide the same conditions for subsequent spraying.

2. The workpiece continuously passes through the inlet and outlet of the shot blasting machine. To clean up steel pipes with extremely large diameters, in order to avoid projectiles flying out, this machine uses multi-layer replaceable sealing brushes to complete the complete sealing of the projectiles.

3. The centrifugal cantilever type novel high-efficiency multifunctional shot blasting machine is used, which has large shot blasting capacity, high power, quick blade replacement, and has the function of replacing all parts and is convenient to repair.

4. The full curtain type BE type slag separator is selected, which greatly improves the separation amount, separation power and shot blasting quality, and reduces the wear of the shot blasting device.

5. This machine relies on PLC electrical control, pneumatic valve cylinder pneumatic control loading and unloading system, projectile controllable gate and projectile transportation and other fault inspections, and completes the automatic control of the whole machine, and then has high production rate, good reliability and leading degree of automation, etc. feature.

6. The filter cartridge can be easily regenerated by selecting pulse, sensation or reverse airflow to clean the dust, and the dust removal effect is good. The filter cartridge filter dust removal technology is a new generation product of bag dust removal, and it is the 21st century filter technology.

  • QR